MiniMAX 500 Bench Top Vapour Blasting Machine
MiniMAX simply runs from a standard 13 amp plug and a 10CFM or larger compressor. No need for a water or drain connection the machine automatically recirculates. Fed up with contracting parts out and waiting days for them to come back ? why not invest in the MiniMAX and do it yourself without the wait.
The perfect addition to any home / hobby garage workshop.
MiniMAX 500 – The machine with a small footprint that packs a big punch. MiniMAX is designed for the small home hobby workshop. However, still produces finished parts to the same standard as larger commercial machines. The kit comes complete with everything required to finish off the assembly. Included in the kit are all rivets, seals and catches, bolts and fixtures required. The wiring is pre done and simply a case of push fitting the correct cables into the correct sockets.
- Full INOX Stainless Steel construction
- Powerful 750w Submersible pumps
- Professional blast nozzle gun with 8mm Boron Nozzle fitted
- Built in exhaust to suit standard 68mm pipe.
- Self Assembly cabinet and legs quick build kit
- No special tools required, simply pop rivet together
- OB1 Sealant supplied with kit
- Commercial grade Gauntlets
- 5mm Plexiglass Screen
- Slam shut door catch and handle
- Fully automatic operation via Foot Pedal supplied
- Full electric pack supplied, including Air Solenoid and Foot Pedal.
- Large work area 600mm wide x 500mm depth and 450mm height !
Whats included in the box : Self Assembly Machine, Electric Pack, Foot Pedal, all fasteners, seals and rivets, Submersible Pump, Blast Gun and 8mm Nozzle, Build Instruction Manual.
Optional Extras : Work Lamp, Blast Media, 6mm Nozzle, Free Standing Leg Extension kit.
NB: THIS MACHINE IS SUPPLIED AS A FLAT PACK KIT, YOU HAVE TO ASSEMBLE AND SEAL THE PRODUCT YOURSELF. ALL THE FABRICATION WORK IS PRE DONE, THERE IS NO BENDING REQUIRED, ITS SIMPLY A CASE OF POP RIVETING PANELS TOGETHER THEN SEALING JOINTS.
WE RECOMMEND GETTING AN AIR RIVETER, THE RIVETS ARE 4.8MM STAINLESS STEEL AND CAN BE QUITE DIFFICULT TO PULL IN BY HAND. AIR RIVETERS ARE AVAILABLE ON LINE AND ARE RELATIVELY INEXPENSIVE.
ALLOW 10 WORKING DAYS FROM ORDER FOR DELIVERY.
|Dimensions||60 × 50 × 50 cm|
wayne Jenkins (verified owner) –
Does what it says on the tin, a better job than dry blasting and without the dust.
Tom Galligan (verified owner) –
Simon Wilkin (verified owner) –
Very good bit of kit, struggled with the rivets though!
I ditched them once had built the sump and used s/s bolts instead!
Gary Shepherd (verified owner) –
Great little machine, does a good job
tony everard –
very happy with the minimax. but an air rivet gun is needed to put it together.
Jim Dunleavy (verified owner) –
Truly excellent value blaster, you will need an air rivet gun, I used the Clarke CAT 151 and it worked brilliantly. One mistake I made in the assembly of the sump was to rivet the side panel on the outside of the flange instead of the inside. When assembled two diagonally opposite rivets just didn’t line up, a quick email to Max and he rang me and showed me what I had done wrong. Rather than remove 28 rivets I redrilled the offending holes.
Support from Max has been amazing, answers emails nearly immediately and is incredibly helpful. In use the machine does a wonderful job of cleaning engine parts and cases for my restoration projects.
I can strongly recommend this product.
Andis Klaperis (verified owner) –
Andy R. (verified owner) –
An excellent product for the price, we’re over the moon 🌛 with it
Kevin Howell (verified owner) –
Awesome bit of kit.
David Darkes (verified owner) –
Very smooth transaction and delivery, assembly instructions were simple and straight to the point, took my time doing it and it went as it should have. I did have 1 small leak from 1 rivet but easily fixed with sealer. I would suggest putting some washers on the long door nuts as they make the door alot smoother.
Exellent bit of kit, well worth the money.
Brian Barnes (verified owner) –
Lovely peice of kit
Antoine Guillo (verified owner) –
M Searl (verified owner) –
Great piece of equipment. Construction information simple but does omit the fitting of the pump securing bracket otherwise perfect.
Carl OSBORNE (verified owner) –
Nice item. Well packaged and delivered. The information leaflet could be a little bit more detailed. I have had to revisit the website to look at the photos and there is no reference to the pump!?
Malcolm Searl (verified owner) –
Really well made kit with precise and accurate instructions.
Andrew M. (verified owner) –
Well designed every fits like a glove.
Kathryn Evans (verified owner) –
Beautiful product. Went together relatively easily. I used a Neilsen Air Hydraulic Riveter 5mm, which worked fine. Max answered every question I sent him really promptly and helpfully. I’ve never used a riveter before but it’s just another air tool. Do look out for the longer rivets which are just for the gauntlet seals – I used several in the main body and drilled them out as I’m a bit perfectionist about the appearance. Excellent all round. Thanks Max
enrico forte (verified owner) –
excellent service & delivery ,Bit disappointed that shortly after my purchase a better gun was introduced would have gone for that but bit dear as aftermarket after just buying machine, would work better with my compressor and I wish I got the next size up,BUT IT WORKS good OH!
Uko Truu (verified owner) –
Samuel Norguez (verified owner) –
DAVID T. (verified owner) –
excellent bit of kit
Roy Cook –
It is looking good so far.